White Industries - VBC V2 Inner Chainring

These hardware sets are needed to mount VBC 2x chainrings to outer VBC 2x chainrings. There are two types of VBC 2x chainrings: v1 for the older 9-11 speed ringsv2 for the new 9-12 speed rings. Detailed instructions on mounting this hardware are found here on the White Industries Website

The V2 VBC (Variable Bolt Circle) inner chainring is designed for Shimano and SRAM 9–12 speed 2x drivetrains, including Shimano 105, Ultegra, GRX, and Dura-Ace (9–12 speed) and SRAM Apex, Rival, and Red (10–12 speed), in both mechanical and electronic configurations. As part of the VBC system, this inner ring mounts to a compatible VBC outer ring, allowing multiple inner ring sizes to be used with the same outer ring. The system supports up to five different inner ring sizes and offers as many as 33 possible gear combinations across the range. The V2 inner ring has been completely redesigned with updated tooth profiles and shift ramp geometry for improved shifting performance. It features refined machining details to work seamlessly with the V2 outer ring, including compatibility with five shift pins and a replaceable chain catch pin when paired as a complete set. Like all V2 VBC components, this inner chainring is backwards compatible with all White Industries MR30 series cranks and White Industries direct mount square taper cranks, however it is not compatible V1 outer rings. To sum it all up: 9-speed to 12-speed compatibility, backwards compatibility with our cranks, more chainstay clearance.Chainrings are made from 7075-T6 aluminum (except 48t-52t which are 6061-T6) Available in black anodize or raw/un-anodized silver V2 VBC 2x inner chainrings must be mounted to the outer chainrings in specific positions to ensure proper shifting Refer to the “VBC v2 Chainring Assembly Instructions” when doing maintenance/replacement For a complete set you will need a V2 outer ring and hardware. Compatibility: Compatible with White Industries cranks only Compatible with Shimano and SRAM 9-12 speed 2x drivetrains, Shimano 9-12 speed 105/Ultegra/GRX/Dura Ace 2x drivetrains Mechanical or electronic versions SRAM 9-12 speed Apex/Rival/Red 2x drivetrains Available to fit either MR30 cranks or ENO/Road Square Taper cranks Each crank style uses a different spline configuration for the outer ring Inner VBC v2 chainrings are the same for either crank style Square taper cranks are NOT compatible with inner 24t combinations v2 VBC 2x chainrings and hardware are not cross compatible with v1 VBC 2x chainrings and hardware, All the parts are different; inner rings, outer rings, chainring bolts, chainring nuts, and shift ramps Combinations smaller than 12-tooth gaps or greater than 20-tooth gaps are not recommended, greater than 20-tooth gaps are too big to shift well, smaller than 12-tooth gaps can cause the chain to catch on downshifts and result in your rear derailleur being ripped off

The V2 VBC (Variable Bolt Circle) inner chainring is designed for Shimano and SRAM 9–12 speed 2x drivetrains, including Shimano 105, Ultegra, GRX, and Dura-Ace (9–12 speed) and SRAM Apex, Rival, and Red (10–12 speed), in both mechanical and electronic configurations. As part of the VBC system, this inner ring mounts to a compatible VBC outer ring, allowing multiple inner ring sizes to be used with the same outer ring. The system supports up to five different inner ring sizes and offers as many as 33 possible gear combinations across the range. The V2 inner ring has been completely redesigned with updated tooth profiles and shift ramp geometry for improved shifting performance. It features refined machining details to work seamlessly with the V2 outer ring, including compatibility with five shift pins and a replaceable chain catch pin when paired as a complete set. Like all V2 VBC components, this inner chainring is backwards compatible with all White Industries MR30 series cranks and White Industries direct mount square taper cranks, however it is not compatible V1 outer rings. To sum it all up: 9-speed to 12-speed compatibility, backwards compatibility with our cranks, more chainstay clearance.Chainrings are made from 7075-T6 aluminum (except 48t-52t which are 6061-T6) Available in black anodize or raw/un-anodized silver V2 VBC 2x inner chainrings must be mounted to the outer chainrings in specific positions to ensure proper shifting Refer to the “VBC v2 Chainring Assembly Instructions” when doing maintenance/replacement For a complete set you will need a V2 outer ring and hardware. Compatibility:Compatible with White Industries cranks only Compatible with Shimano and SRAM 9-12 speed 2x drivetrains, Shimano 9-12 speed 105/Ultegra/GRX/Dura Ace 2x drivetrains Mechanical or electronic versions SRAM 9-12 speed Apex/Rival/Red 2x drivetrains Available to fit either MR30 cranks or ENO/Road Square Taper cranks Each crank style uses a different spline configuration for the outer ring Inner VBC v2 chainrings are the same for either crank style Square taper cranks are NOT compatible with inner 24t combinations v2 VBC 2x chainrings and hardware are not cross compatible with v1 VBC 2x chainrings and hardware, All the parts are different; inner rings, outer rings, chainring bolts, chainring nuts, and shift ramps Combinations smaller than 12-tooth gaps or greater than 20-tooth gaps are not recommended,  greater than 20-tooth gaps are too big to shift well, smaller than 12-tooth gaps can cause the chain to catch on downshifts and result in your rear derailleur being ripped off 

For a long time square taper was king, but in recent years the development of new axle standards have redefined crank and drive train standards. We, at White Industries, answer this change by offering the MR30 cranksets. The R30 is our do it all road crank using our long standing VBC, variable bolt circle, design. The VBC system is built around a 68/86mm bottom bracket and allows you to customize your 2x ring configuration by being able to mix and match your inner and outer ring to create the ultimate gearing suitable for whatever ratio you desire. The R30 is also available with ourTSR 1x narrow wide chain rings. The narrow arms and narrow spindle compliment the svelte lines of any road frame. This R30 is compatible with BSA, T47 and Press Fit 30 systems. Available in silver polished or black anodized, with colored extractor bolts.Material: 2024 al Weight: 560g * Chain line: 1x: 46.5mm 2x: 45mm Q factor: 157.2mm *weight includes 170mm crank arms and spindle only

White Industries VBC Crank Arm Set These are only the arms, no rings included!