Rear Dynamo Lights

Small. Smaller. [my:]. The smallest rear light approved for road use. [my:]. Minimalistic in a high-grade aluminium casing. Fits aluminium design headlights by Busch + Müller. In spite of its small size, it offers good visibility all around. µ may be mounted to the mudguard as well as to the strut or seat post. Small, efficient and very visible, the rear light is a great fit for modern bicycles. Like all our rear lights: StVZO-approval. Details: Dynamo Lamp 6V

This B+M light combines modern LED technology with standlight function in an extremely compact body. Once fitted to the rear rack of your bike, you'll get both safety and great looks. Spreading the light via LineTec ribs provides a wider light beam, making it easier for following traffic to estimate the distance.Details:• Permanently installed light cable pair with plugs, length: approx. 5 cm• Suitable for rear racks with a bolt spacing of 50 mm• Plastic housing• Standlight for at least 4 minutes (cannot be switched off)• Incl. overvoltage protection• Dimensions: approx. 35 x 14 x 19 mm• Weight: approx. 12 g• Incl. mounting kit• Available with red or clear glass (in both cases, the LED lights are red)• Manufacturer's ref. : 532341askpb (red), 53234askpb (clear)

Sinewave Multi Power Tail-lightMultiple power options Can connect directly to the taillight output of a dynamo headlight and can connect directly to the dynamo. Other dynamo taillights cannot handle the full power of the dynamo and must be protected by the headlight. The Sinewave Taillight CAN handle the full dynamo power. This allows you to use the Taillight without a headlight, or to connect the Taillight to the dynamo in parallel with the headlight, so the Taillight will always be on while the headlight can be switched on and off. Can connect to a DC power supply, including an eBike controller or USB battery. DC voltage range is 3.5V - 36V Selectable blinking mode The Taillight can be configured in either steady or blinking mode. Flexible mounting options The Taillight can be mounted anywhere on the bike, either directly or with a simple adapter. Integrated reflector The lens doubles as a reflector, providing extra safety even when the Taillight is off. Small and light Diameter = 29mm, Length = 32mm,  Weight (including wire) = 30g What's included in the box? The Taillight comes with an M5x35mm bolt and 2 washers for installation to an eyelet. Adapters are available for other mounting locations.

SON rear light K 920 for luggage rackThe minimalist SON taillight K 920 is designed for mounting on luggage racks (hole spacing 50 mm). It is used where conventional taillights with integrated reflectors do not fit for optical reasons or due to the lack of attachment options. The taillight fits particularly nicely into the wheel look. The light power of a high-performance LED is fanned out on two groove profiles - so that the following traffic can better estimate the distance to you and your safety increases. In addition, the rear light impresses with its parking light function and its anodized aluminum housing. Electronics and optics are potted watertight. The robust, 190 cm long coaxial cable for connection to the headlight is firmly attached. Material: aluminum Illuminant: 1 red LED Fastening: by means of screws on the luggage rack (hole spacing 50 mm) Dimensions: 35 mm wide, 20 mm deep, 20 mm high Cable length: 190 cm with loose cable lugs Test mark: K 920 Color housing: black, silver, red, blue, orange, light green Color optics: clear or red Weight 20g (without cable)  Scope of delivery: 1x SON taillight K 920 incl. 190 cm coaxial cable 6x fastening screws, 2x nuts, self-locking 2x cable lugs, 1x ground connection, 4x shrink sleeves

This elegant rear light for mudguard mount is available in 2 designs. The„retro“ version with rounded, polished housing and the „modern“ version, with angular shape and anodized black.  Each with narrow or wide profile for mudguards with narrow or wide profile High mounting position (25 degrees)Narrow profile: for mudguards with 40-50 mm width circaWide profile: for mudguards from 50 mm or wider  or with low profileSON Coaxial Cable 190 cm (fixed inside the housing, bare ends, connectors separately enclosed)Conforms with German legal regulations / ISO 6742Weight (w/o cable): 40 g Made in Germany, 5 years warranty

SON Rear Light for rack tube mount Mounts on a tube with Ø 10 mmSmart mounting option for minimalist FAHRER design rackConforms with German legal regulations / ISO 6742 SON Coaxial Cable 190 cm (fixed inside the housing, bare ends, connectors separately enclosed)

SON Rear Light is of minimal dimensions. So it fits where common rear lights with integrated reflectors are too large. Its housing is made of anodized aluminium. Lens and electronics are encapsulated. The coaxial cable for headlight connection is firmly fixed inside the housing. Standlight capacitor is integrated. Elegant fitting on a seatpost with tensioning strap and tensioning nutTensioning tool included in deliveryFor seatposts form 26mm-31.8mmMinimum sized aluminium housing, resin cast and fully watertightIntegrated standlight capacitor Robust coaxial cable 1,9 m Made in Germany 5 years warranty

GoPro mounts are incredibly versatile—designed to mount your camera in many locations. That also makes them ideal for mounting a taillight. SON now offers their taillight to fit directly on a GoPro mount. The light can also be adapted for mounting on rack or fender eyelets and many other locations. Notes: This taillight is designed to be powered by a generator hub. It does not have its own power source (batteries). The taillight comes with a co-axial cable to connect to the headlight. One pole connects to the taillight tab of the SON Edelux headlight, the other to the (grounded) housing of the headlight. (A round connector is included that can be placed under the mounting bolt of the Edelux headlight.) The taillight housing is not grounded and cannot be used for the return current. Specs: Aluminum housing Built-in reflector Modern LED internals Standlight Anodized black Size: 41 x 19 mm Depth: 35 mm 180 cm co-axial wire 51 g

SON Dynamo rear light, integrated in seatclamp. Elegenant and minimal designSpecs: Seatclamps 31,8 mm of 34,9 mm diameter Cable van 190 cm StVZO/ ISO 6742 Weight (without cable): 50 g

Now also for Dynamo! The tiny but powerful Supernova TL3 mini rear light is the perfect choice for everyone who value high visibility, security and a small measure. With its ultra -compact dimensions and the low weight, it is very light and space -saving, but can still be securely attached to the seat post or luggage rack. Despite the small size, the high density LED technology ensures an extremely high light density and a widely visible, homogeneous light signature with high recognition value. A stable and waterproof housing reliably protects the technology. Parking light function in conjunction with Supernova Dynamo headlights. 6 V / 0,65 W Light intensity: 6 CD Material: Anodized aluminum, black polished (carrier plate), impact -resistant plasticHousing road: 16 x 61.5 x 11.5 mm, assembly-wide 50 mm standard (luggage rack variant) Cable length: 1,400 mm Weight: 9 G (luggage rack variant), without cable.Guarantee: 5 years

Now also for Dynamo! The tiny but powerful Supernova TL3 mini rear light is the perfect choice for everyone who value high visibility, security and a small measure. With its ultra -compact dimensions and the low weight, it is very light and space -saving, but can still be securely attached to the seat post or luggage rack. Despite the small size, the high density LED technology ensures an extremely high light density and a widely visible, homogeneous light signature with high recognition value. A stable and waterproof housing reliably protects the technology. Parking light function in conjunction with Supernova Dynamo headlights. 6 V / 0,65 W Light intensity: 6 CD Material: Anodized aluminum, black polished (carrier plate), impact -resistant plasticCable length: 1,400 mm Weight: 9 G (Without cable)Guarantee: 5 years

The new TL3 Mini Seatpost Clamp: Now this tail light is available stylishly integrated into a seatpost clamp – for maximum visibility and safety in an elegant design. The High Density LED technology ensures extremely high luminous density despite its small size and a widely visible, homogeneous signature with the characteristic SUPERNOVA light ring. A stable and waterproof housing reliably protects the technology. The taillight is available in a 6 V version, ensuring compatibility with dynamos and 6 V e-bike light ports.Note: The seatpost clamp is for securing the seatpost in the frame. This bracket with integrated light is not attached to the seat post, but sits on the upper edge of the vertical frame tube (seat tube). The clamping diameter of the clamp bracket therefore does not correspond to the outer diameter of the seat post, but to the outer diameter of the seat tube at its highest point.