Revelate Designs Mag Tank Bolt On

€79.95*

Product number: RD-083-445
Manufacturer: Revelate Designs
Manufacturernumber: RD-083-445
Stock: 0
Product information "Revelate Designs Mag Tank Bolt On"

We took the beloved Mag-Tank™ and made a version compatiable with top tube bolt bosses.

The Mag-Tank™ takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages!

Compared to our standard Gas Tank, the Mag-Tank™ is just a hair smaller to prevent leg movement from hitting the edge of the flap opening.

Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag.


Features

  • One-handed access while riding
  • Side panels stiffened with HDPE plastic sheets
  • Wrap around panel is padded with closed cell foam
  • Interior lined with yellow fabric for greater visibility
  • Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts
  • Two sets of mounting holes on bag bottom to allow bolt-on attachment to top tube.
    • First set of mounting holes spaced at 76mm (+/- 2mm) off center from head tube. 
    • Second set of mounting holes spaced at 100mm (+/- 2mm) off center from head tube. 

Sizing

  • Length: 8.5"
  • Max height: 5"
  • Width at stem: 2.5"
  • Tapers down to 2.5" tall and 1.5" wide along the top tube
  • Distance between mounting holes is standard water bottle cage spacing, 64mm. 

Made in the USA with domestic and imported materials.

Note: Mounting bolts not included. During test fitting we have noticed that longer bolts may be needed on the Salsa Cutthroat

Specifications

  • Weight: 4.5 oz
  • Volume: 65'ish cubic inches
  • Materials: VX21 & 42 XPac; 420 denier yellow and red lining; closed cell foam padded tube sections. HDPE sheets.