Spatbord delen

A pair of eyelets that attach to Quick Release (QR) skewer for mounting PDW Full Metal or Poncho fenders to bikes without eyelets brazed on the frame.

These alloy fender spacers help properly mount full-coverage fenders to a myriad of bicycle frame designs. Use them to space fender stays away from dropouts, seatstay bridges, disc brakes, etc to bring your fenders into the best position near your tires for maximum protection from the elements. Specifications: 4x 10mm alloy spacers Spacer outer diameter 10mm Spacer inner diameter 5.2mm 2x M5 30mm long bolts

Replacement rear hangers for all widths of Full Metal Fenders and Poncho Fenders. 55mm and 65mm/2.5" widths have a longer slot to bring the fender closer to the tire. If a longer slotted hanger is needed to bring the fender closer to the tire on 37mm or 45mm fenders, use the 55mm hanger and give the hanger arms an extra bend around the fender.

Don't drill holes into your rear fender any more! These new rear hangers allow you to bolt the hanger directly to brake bridges with eyelets located on the underside of the bridge.

Problem Solvers Sheldon Fender Nuts Set - Front and Rear Mounting fenders to bikes with road calipers is a real pain in the arse. Fickle creatures, the calipers become difficult to adjust once the fenders’ tab is stuck on the backside. Enter the late Sheldon Brown. One of our true heroes, Sheldon gave us the idea for our cleverly named Sheldon fender nut. Basically, the Sheldon nut replaces your caliper’s brake nut, but also contains threads for standard M6 bolts. This allows you to install and remove the fenders without messing with your brakes.Problem Solvers Sheldon Fender Nuts Set - Front and Rear Replaces standard brake nuts on steel and aluminum frames Great for commuters Sold as a set, front (32mm or 13mm) and rear (10mm)