Hope Floating Disc (6-Gaats)
Productnummer:
Hope-Float-160-Red
Fabrikant:
Hope
Fabrikant nummer:
Hope-Float-160-Red
Direct beschikbaar:
1
Productinformatie "Hope Floating Disc (6-Gaats)"
The best rotors have become even better. The rotor matches your Hope brakes, but they also fit the Shimano, Sram, and Magura systems with their widened braking surface. Because the rotor consists of two parts, the braking surface is not constricted when riding in extreme conditions. This guarantees high braking performance, also in long descents.
Please note: Fitting Instructions
To allow the brake disc to move, the rivets between the brake disc and the spider are slightly wider than on other brake discs. These five rivets have a diameter of 16 mm and are 26.5 mm below the highest point of the brake surface. They extend 1 mm beyond the brake surface on both sides. Pay attention to this before installing the brake disc, to prevent the disc from dragging against your frame, wheel or caliper. The width of the brake surface itself is 2.7 mm. Due to the position of the rivets, we advise to use these rotors with Hope Brakes
To allow the brake disc to move, the rivets between the brake disc and the spider are slightly wider than on other brake discs. These five rivets have a diameter of 16 mm and are 26.5 mm below the highest point of the brake surface. They extend 1 mm beyond the brake surface on both sides. Pay attention to this before installing the brake disc, to prevent the disc from dragging against your frame, wheel or caliper. The width of the brake surface itself is 2.7 mm. Due to the position of the rivets, we advise to use these rotors with Hope Brakes