Wolf Tooth B-RAD Tek-Lite Roll-Top Bags offer extra cargo space for carrying riding essentials on your frame. These bags are crafted from the lightweight, water-resistant, and durable Tek-Lite material, and have sealed seams that will protect bag contents from water, dirt, and other road/trail debris.
Bags offer the capacity to carry multi-tools, small hand pump, spare tube, and/or snacks
Can be attached under a saddle, strapped to a frame with silicone-lined straps, in a bottle cage, or onto any B-RAD Base
Slim, streamlined design that will stay out of the way of cranks and pedaling legs
Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved.Â
Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment. This allows the bottle to be mounted as low as possible in the frame for improved clearance or moved upward for easier reach
Designed to be easily flipped to provide either left or right hand bottle access.
Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset. This makes it much easier access to the bottle, even on hardtails or road/gravel bikes. On some full suspension bikes it may not be possible to fit a bottle under the frame shock without this offset
Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes (brackets for many pumps do not clear the frame on mountain bikes)
The B-RAD Everywhere Base is a versatile mount that allows riders to add a bottle cage where there is not a mount on the frame. The silicone-backed hook-and-loop straps that fasten the B-RAD Everywhere Base to the bike are grippy and can easily be installed or repositioned as needed. The Everywhere Base can function as a B-RAD base, offsetting existing bottle cage bosses by up to 22mm to make room for frame bags, piggyback shocks, or other accessories.
Specs:
B-RAD Everywhere Base 2 is ideal for standard water bottle cages.
B-RAD Everywhere Base 3 is ideal for cargo cages that use three bolts.
Silicone-backed hook-and-loop straps keep base securely in place.
Lightweight, durable, rustproof aircraft-grade aluminum with ED-coated hardware.
Hardware includes bolts with T25 Torx head, two silicone-backed straps, and foam pads with adhesive backing.
Compatibility
Compatible with most bike frames and seatposts.
Bases are the foundation for the B-RAD System which allows you to mount accessories.
Requires use of both included straps for secure installation.
Note
Everywhere Base is not designed or intended to be used on forks.
The B-RAD Everywhere Base is a versatile mount that allows riders to add a bottle cage where there is not a mount on the frame. The silicone-backed hook-and-loop straps that fasten the B-RAD Everywhere Base to the bike are grippy and can easily be installed or repositioned as needed. The Everywhere Base can function as a B-RAD base, offsetting existing bottle cage bosses by up to 22mm to make room for frame bags, piggyback shocks, or other accessories.
Specs:
B-RAD Everywhere Base 2 is ideal for standard water bottle cages.
B-RAD Everywhere Base 3 is ideal for cargo cages that use three bolts.
Silicone-backed hook-and-loop straps keep base securely in place.
Lightweight, durable, rustproof aircraft-grade aluminum with ED-coated hardware.
Hardware includes bolts with T25 Torx head, two silicone-backed straps, and foam pads with adhesive backing.
Compatibility
Compatible with most bike frames and seatposts.
Bases are the foundation for the B-RAD System which allows you to mount accessories.
Requires use of both included straps for secure installation.
Note
Everywhere Base is not designed or intended to be used on forks.
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.Wolf Tooth Components B-RAD Accessory Strap Mount:
Mounts to bottle bosses, or to the B-Rad base for additional carrying options
Strap is 50mm wide and holds loads 50-80mm diameter (2-3.25 inches)
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.Wolf Tooth Components B-RAD Accessory XL Strap Mount:
Mounts to bottle bosses, or to the B-Rad base for additional carrying options
Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
Cradle strap is 40mm wide and 350mm long for supporting loads
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. With a variety of fitments, B-RAD is all about keeping cargo off the back and onto the bike.Specs:
Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm
Designed to maximize bottle capacity on small frame bikes and dual suspension frames
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. With a variety of fitments, B-RAD is all about keeping cargo off the back and onto the bike.Specs:
Three slots for additional adjustments over the B-RAD 2 base
Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. With a variety of fitments, B-RAD is all about keeping cargo off the back and onto the bike.Specs:
Long, four-slotted mount allows two, smaller bottles to be mounted in-line
Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.Wolf Tooth Components B-RAD Accessory Mini Strap Mount:
Mounts to bottle bosses, or to the B-Rad base for additional carrying options
Strap is 40mm wide and holds loads 30-60mm diameter (1.25-2.5 inches)
B-BRAD accessories allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. Designed to carry two bottles or accessories off of one B-RAD baseWolf Tooth Components B-RAD Double Barrel Bottle Cage
B-RAD accessories allow for cargo customization and cargo optimization. The Half Bottle with Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base.Wolf Tooth Components B-RAD Half Bottle with DogBone:
The Half Bottle Adapter moves the bottle over about half a bottle radius to make the bottle easier to access, and allows for the addition of a B-RAD accessory strap mount
Included dogbone eliminates the requirement for the B-RAD base
Wolf Tooth Components B-RAD Pump Bag Black. The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it.Wolf Tooth Components B-RAD Pump Bag Black
Wolf Tooth Components B-RAD Pump Bag Black:
Mounts to the B-RAD system or on its own
Dimensions: 30 cm x 6.5 cm x 6.5 cm
€ 54,95*
Deze website maakt gebruik van cookies om de best mogelijke ervaring te waarborgen. Meer informatie...