SON 28 135 IS Voorwiel

Small. Smaller. [my:]. The smallest rear light approved for road use. [my:]. Minimalistic in a high-grade aluminium casing. Fits aluminium design headlights by Busch + Müller. In spite of its small size, it offers good visibility all around. µ may be mounted to the mudguard as well as to the strut or seat post. Small, efficient and very visible, the rear light is a great fit for modern bicycles. Like all our rear lights: StVZO-approval. Details: Dynamo Lamp 6V

This B+M light combines modern LED technology with standlight function in an extremely compact body. Once fitted to the rear rack of your bike, you'll get both safety and great looks. Spreading the light via LineTec ribs provides a wider light beam, making it easier for following traffic to estimate the distance.Details:• Permanently installed light cable pair with plugs, length: approx. 5 cm• Suitable for rear racks with a bolt spacing of 50 mm• Plastic housing• Standlight for at least 4 minutes (cannot be switched off)• Incl. overvoltage protection• Dimensions: approx. 35 x 14 x 19 mm• Weight: approx. 12 g• Incl. mounting kit• Available with red or clear glass (in both cases, the LED lights are red)• Manufacturer's ref. : 532341askpb (red), 53234askpb (clear)

Sinewave Multi Power Tail-lightMultiple power options Can connect directly to the taillight output of a dynamo headlight and can connect directly to the dynamo. Other dynamo taillights cannot handle the full power of the dynamo and must be protected by the headlight. The Sinewave Taillight CAN handle the full dynamo power. This allows you to use the Taillight without a headlight, or to connect the Taillight to the dynamo in parallel with the headlight, so the Taillight will always be on while the headlight can be switched on and off. Can connect to a DC power supply, including an eBike controller or USB battery. DC voltage range is 3.5V - 36V Selectable blinking mode The Taillight can be configured in either steady or blinking mode. Flexible mounting options The Taillight can be mounted anywhere on the bike, either directly or with a simple adapter. Integrated reflector The lens doubles as a reflector, providing extra safety even when the Taillight is off. Small and light Diameter = 29mm, Length = 32mm,  Weight (including wire) = 30g What's included in the box? The Taillight comes with an M5x35mm bolt and 2 washers for installation to an eyelet. Adapters are available for other mounting locations.

The Sinewave Beacon is a 750 Lumen Dynamo powered bike light with integrated USB charger. Charge your phone, GPS, or any other USB device directly from the Beacon; no need for a separate charger. With an external, off-the-shelf USB battery pack connected a bright, flicker-free light can be maintained, even when stopped or riding slowly. Any available dynamo power replaces battery power until reaching a speed when all power is provided by the dynamo and the battery is no longer used. The symetrical beam pattern is the ideal choice for off-road riding.STEADY LIGHT OUTPUT Flicker-free light down to 3-4 MPH. INTEGRATED USB CHARGER Charge your phone, GPS, or any other USB device directly from the Beacon; no need for a separate charger. FLEXIBLE POWER OPTIONS An external, off-the-shelf USB battery pack can be connected to maintain bright, flicker-free light even when stopped or riding slowly.  Any available dynamo power replaces battery power until reaching a speed when all power is provided by the dynamo and the battery is no longer used. 750 LUMENS Lots of light, suitable for any style of riding.  SYMMETRICAL BEAM PATTERN Ideal choice for off-road riding. SUPERIOR BRIGHTNESS AT LOW AND MEDIUM SPEEDS Dynamo power is optimized at low-to-medium speeds, reaching 100 lumens at 5 MPH, 375 lumens at 8 MPH, 600 lumens at 10 MPH, and 750 lumens at 13 MPH. LOW BRIGHTNESS MODE A reduced brightness mode for situations where full brightness is not needed, and for easy power sharing between the light and charger. STANDLIGHT A supercapacitor, charged while riding, provides about 5 minutes of standlight when stopped.  The standlight can be turned off with the toggle switch. BLINKING MODE A blinking mode is available when using external battery power. COLOR OPTIONS We are able to mix-and-match different colors for the front, middle, and back of the Beacon.  Pick a combination that matches your bike or represents your country or team.  Contact us about custom colors. MOUNTING OPTIONS The 10mm mounting tab is compatible with mounting hardware from B&M, Supernova, Schmidt, etc. COMPACT DESIGN L x W x H - 58 x 42 x 42mm 115g (includes 36" dynamo wire) TAILLIGHT OUTPUT A taillight output is available and is controlled by the headlight. Taillight compatibility information can be found here. BETTER COLOR TEMPERATURE While still in the "cool white" range, the Beacon generates slightly warmer light than other LED headlights.  This results in less glare, less strain on your eyes, and does a better job reproducing natural colors. WEATHERPROOF Designed to be used in any conditions.  Multiple seals protect against water ingress, electronics are potted in epoxy, and all connectors are gold plated and designed for resistance to the elements. MADE IN THE USA All Sinewave products are made in the USA.  The Beacon is the only commercially available dynamo light made in the USA. WARRANTY 3 years WHAT'S IN THE BOX? The Beacon comes with a USB-to-DC cable.   A mount is not included - there are many options available for different mounting locations.  Contact us if you need advice about mounting options. A right-angle USB extension cable is available here. Specs: L x W x H - 58 x 42 x 42mm 115g (includes 36" dynamo wire) USB-to-DC cable included All Sinewave products are made in the USA. The Beacon has a 3 year warranty

SON Achterlicht voor bagagedragers.Dit achterlicht is een klein LED achterlicht voor montage op de zadelpen (26-31.6mm diameter) met standlicht. Hij is ontworpen voor gebruik met een 3w naafdynamo, je sluit hem aan op de koplamp, en gaat zo automatisch aan en uit.Specs: Aluminium huis, zwartof zilver geanodiseerd Gekoelde LED voor maximale levensduur en opbrengst Reflector met breed lichtbeeld Standlicht (dooft automatisch na ca 5 minuten, is niet zelf uit te zetten) Vlakke achterkant, montage zonder boren met snoer aan de onderzijde Aansluiting op koplamp C.a. 64 x 18 x 20mm, 62 gram Aansluitdraad 1.9 m (met losse stekkers) 5 jaar garantie Wordt geleverd met losse (rode) retroreflector, gemonteerd achterlichtsnoer  aansluitmateriaal en rvs schroeven in de kleur van het huis Waterdicht

SON Achterlicht voor bagagedragers.Het Schmidt achterlicht is een klein (gatafstand 50mm) LED achterlicht voor dragermontage met standlicht. Hij is ontworpen voor gebruik met een 3w naafdynamo, je sluit hem aan op de koplamp, en gaat zo automatisch aan en uit.  Specs: Aluminium huis, zwartof zilver geanodiseerd Gekoelde LED voor maximale levensduur en opbrengst Reflector met breed lichtbeeld Standlicht (dooft automatisch na ca 5 minuten, is niet zelf uit te zetten) Vlakke achterkant, montage zonder boren met snoer aan de onderzijde Aansluiting op koplamp C.a. 64 x 18 x 20mm, 50 gram (ex rode reflector) Aansluitdraad 1.9 m (met losse stekkers) 5 jaar garantie Wordt geleverd met losse (rode) retroreflector, gemonteerd achterlichtsnoer  aansluitmateriaal en rvs schroeven in de kleur van het huis Waterdicht

SON Achterlicht voor bagagedragers.Dit achterlicht is een klein LED achterlicht voor montage op de zadelpen (26-31.6mm diameter) met standlicht. Hij is ontworpen voor gebruik met een 3w naafdynamo, je sluit hem aan op de koplamp, en gaat zo automatisch aan en uit.Specs: Aluminium huis, zwartof zilver geanodiseerd Gekoelde LED voor maximale levensduur en opbrengst Reflector met breed lichtbeeld Standlicht (dooft automatisch na ca 5 minuten, is niet zelf uit te zetten) Vlakke achterkant, montage zonder boren met snoer aan de onderzijde Aansluiting op koplamp C.a. 64 x 18 x 20mm, 62 gram Aansluitdraad 1.9 m (met losse stekkers) 5 jaar garantie Wordt geleverd met losse (rode) retroreflector, gemonteerd achterlichtsnoer  aansluitmateriaal en rvs schroeven in de kleur van het huis Waterdicht

De Edelux II is de verbeterde versie van de bekende Edelux.De lamp heeft een hogere opbrengst (max 100 Lux) en dankzij de reflector van B&M een lichtbundel die nabij erg breed is en gelijkmatig afvlakt verderaf. Voorzien van een robuuste, goed gekoelde LED. Magneetschakelaars zorgen ervoor dat de koplamp waterdicht is. Deze Edelux II lamp is gemaakt om hangend gemonteerd te worden. Hiermee is de lamp bij uitstek geschikt voor montage onder een frontrek of aan het stuur Specs: Vijf (5) jaar garantie 6 Volt Wisselstroom van een naafdynamo Maximaal 100 Lux helderheid Veilig op de weg: StVZO Toegelaten / ISO 6742 Gewicht: 75 g (zonder kabel) 140cm Kabel 5 Minuten standlicht Aansluiting voor achterlicht Voor hangende/upside down montage Levering: Koplamp Bracket Edelux (75520) Reflector (75760) Standaard SON aansluiting Kan voorzien worden van een Coax Adapter.

De Edelux II is de verbeterde versie van de bekende Edelux.De lamp heeft een hogere opbrengst (max 100 Lux) en dankzij de reflector van B&M een lichtbundel die nabij erg breed is en gelijkmatig afvlakt verderaf. Voorzien van een robuste, goed gekoelde LED. Magneetschakelaars zorgen ervoor dat de kopland waterdicht is.Specs: Vijf (5) jaar garantie 6 Volt Wisselstroom van een naafdynamo Maximaal 100 Lux helderheid Veilig op de weg: StVZO Toegelaten / ISO 6742 Gewicht: 75 g (zonder kabel) 140cm Kabel 5 Minuten standlicht Aansluiting voor achterlicht Levering: Koplamp Bracket Edelux (75520) Reflector (75760) Standaard SON aansluiting Kan voorzien worden van een Coax Adapter.

THE LADELUX IS NOT AVAILABLE FOR SHIPPING. Only for installation at JustPedal Bikeshop. Contact us for info. Een SON dynamo koplamp met geïntegreerde laad-electronica en 1200 mAh accu. De koplamp kan maar liefst 12W energie uit een SON naafdynamo halen waardoor je zelfs je smartphone kan laden met ingeschakeld licht.Hoogwaardige koplamp op basis van de Edelux IIGeïntegreerde laad electronica en 1200 mAh accuBasis dynamo lichtbron van 120 Lux die met de accu uitgebreid kan worden tot een schijnwerper van maar liefst 180 LuxUSB lader (5W / 1A) Bediening via losse schakelaar die op het stuur gemonteerd wordt.To use the light you also need: Switch (20  or 46cm) 79,95 Euro Charge cable: USB-C (30 or 46cm) 40,95 Euro Charge cable: Lightning/Apple (46cm) 42,95 euro

Mounts on a tube with Ø 10 mm Smart mounting option for minimalist FAHRER design rack SON Coaxial Cable 190 cm (fixed inside the housing, bare ends, connectors separately enclosed) Conforms with German legal regulations / ISO 6742

GoPro mounts are incredibly versatile—designed to mount your camera in many locations. That also makes them ideal for mounting a taillight. SON now offers their taillight to fit directly on a GoPro mount. The light can also be adapted for mounting on rack or fender eyelets and many other locations. Notes: This taillight is designed to be powered by a generator hub. It does not have its own power source (batteries). The taillight comes with a co-axial cable to connect to the headlight. One pole connects to the taillight tab of the SON Edelux headlight, the other to the (grounded) housing of the headlight. (A round connector is included that can be placed under the mounting bolt of the Edelux headlight.) The taillight housing is not grounded and cannot be used for the return current. Specs: Aluminum housing Built-in reflector Modern LED internals Standlight Anodized black Size: 41 x 19 mm Depth: 35 mm 180 cm co-axial wire 51 g

SON Dynamo rear light, integrated in seatclamp. Elegenant and minimal designSpecs: Seatclamps 31,8 mm of 34,9 mm diameter Cable van 190 cm StVZO/ ISO 6742 Weight (without cable): 50 g

Shutter Precision DS-4 Dynamo Light Ideal for use with SP or any brand of dynamo hub. With free-form optical technology and its super slim size, the DS-4 is an ideal combination of form and function. Alloy body with integrated lens hood to prevent the rider from receiving excess glare. High tech optical lens delivers a straight cut-off beam pattern – preventing unwanted dazzling of oncoming traffic and allows this light to meet German StVZO regulations.Specs: Output:  (lumens) 290 Optics:  StVZO regulation with clear cut-off line Dimensions:  50 x 45 x 42mm Colour:  Black

Now also for Dynamo! The tiny but powerful Supernova TL3 mini rear light is the perfect choice for everyone who value high visibility, security and a small measure. With its ultra -compact dimensions and the low weight, it is very light and space -saving, but can still be securely attached to the seat post or luggage rack. Despite the small size, the high density LED technology ensures an extremely high light density and a widely visible, homogeneous light signature with high recognition value. A stable and waterproof housing reliably protects the technology. Parking light function in conjunction with Supernova Dynamo headlights. 6 V / 0,65 W Light intensity: 6 CD Material: Anodized aluminum, black polished (carrier plate), impact -resistant plasticHousing road: 16 x 61.5 x 11.5 mm, assembly-wide 50 mm standard (luggage rack variant) Cable length: 1,400 mm Weight: 9 G (luggage rack variant), without cable.Guarantee: 5 years

Now also for Dynamo! The tiny but powerful Supernova TL3 mini rear light is the perfect choice for everyone who value high visibility, security and a small measure. With its ultra -compact dimensions and the low weight, it is very light and space -saving, but can still be securely attached to the seat post or luggage rack. Despite the small size, the high density LED technology ensures an extremely high light density and a widely visible, homogeneous light signature with high recognition value. A stable and waterproof housing reliably protects the technology. Parking light function in conjunction with Supernova Dynamo headlights. 6 V / 0,65 W Light intensity: 6 CD Material: Anodized aluminum, black polished (carrier plate), impact -resistant plasticCable length: 1,400 mm Weight: 9 G (Without cable)Guarantee: 5 years

The new TL3 Mini Seatpost Clamp: Now this tail light is available stylishly integrated into a seatpost clamp – for maximum visibility and safety in an elegant design. The High Density LED technology ensures extremely high luminous density despite its small size and a widely visible, homogeneous signature with the characteristic SUPERNOVA light ring. A stable and waterproof housing reliably protects the technology. The taillight is available in a 6 V version, ensuring compatibility with dynamos and 6 V e-bike light ports.Note: The seatpost clamp is for securing the seatpost in the frame. This bracket with integrated light is not attached to the seat post, but sits on the upper edge of the vertical frame tube (seat tube). The clamping diameter of the clamp bracket therefore does not correspond to the outer diameter of the seat post, but to the outer diameter of the seat tube at its highest point.

The E3 PRO 2 is the top model of our dynamo light series. It has won multiple awards and has been ranked first in most magazine reviews, endorsing its superiority. Whether you're just commuting to work or traveling through remote landscapes in the world, this continuous, brilliant light will make sure you notice every shard of glass or pothole. A highlight of the E3 PRO 2 is the glowing Supernova logo. Not only does it add an aesthetic look to this light, it also greatly increases your safety with clearly visible side-illumination. Technical data: 205 lm (25 km/h) Input voltage: 6 V / 3 W Dynamo (AC) Lens type: Terraflux 2 Illuminant: Power LED L x W x H: 69 x 40 x 40 mm Material: 6061 aluminium Weight: 110 g without bracket Optimized for day time running 5-minute stand light - also supplies the Supernova Tail Light With tail light cable and mechanical switch Cable length to dynamo: 980 mm, to rear light 1,080 mm 5 year warranty

The E3 PURE 3 has three amazing features: It's sleek, bright and lightweight. When mounted on your handlebar, the E3 PURE 3 adds pure elegance to your urban bike. Because the light is mounted high up on the handlebar, the resulting carpet of light has a wide spread without the front wheel throwing a shadow. With no switch, the E3 PURE 3 runs non-stop, which means that you hardly ever need to think about it unless you exceed the LEDs lifespan of over 100 years. So with this light, you are in safe hands, day and night. The Terraflux 2 lens is unique and allows us to produce lights that function both at night and as daytime running light. We eliminated unnecessary electronics and additional LEDs in order to add a minimalistic light to our dynamo light series. Technical data: 205 lm Input voltage: 6 V / 3 W Dynamo (AC) Lens type: Terraflux 2 Illuminant: Power LED L x W x H: 49 x 41 x 41 mm Material: 6061 aluminium Weight: 90 g without bracket Optimized for day time running 5-minute stand light - also supplies the Supernova Tail Light No switch, fully automated Cable length to dynamo: 980 mm, to rear light 1,080 mm 5 year warranty