Tumbleweed - T-Rack V2
€ 169,95
Beschikbaar, levertijd: 1-6 Dagen
Productinformatie "Tumbleweed - T-Rack V2"
- Completely redesigned mounting hardware to reduce the likelihood of loosening over time (You will need to still check hardware tightness regularly as with any rack)
- Two sets of extra long 350mm mounting struts, one straight and one offset to more easily fit a wider range of bikes -Internal dynamo wiring port on the platform for a headlight or tail light
- Increased 12mm tube diameter of vertical leg with thinner walls to increase stiffness and reduce weight (load rating over the center of the platform remains 30lbs
- ) The T rack weights 470 grams without hardware, 649 grams including all mounting hardware, bolts and uncut 350mm struts. You'll need proper threaded load bearing mounting points at the dropouts and seatstays or fork crown in order to properly mount the T rack on your bike. If you don't have upper rack bosses, there are seat clamps with integrated rack mounts available.
- Certain lightweight panniers can work, we've used the Porcelain Rocket/Rockgeist panniers on the T rack and they work since the panniers strap on to the rack and have a rigid back panel.
- The T rack was designed for front or rear mounting as long as you have a pair of upper and lower threaded bosses and your frame/fork was designed to accept a standard rack.
TRackAdapt
This powder coated steel rack adaptor mounts to the center fork crown hole on your steel or aluminum fork (or carbon fork if the manufacturer allows it) and gives you two fork crown mounting points for our rack struts. The adaptor is drilled for an M5 bolt for the fork crown, and includes an M5x45mm bolt (you may need a longer or shorter bolt depending on the thickness of your fork crown) and M5x16mm bolts for attaching our rack struts to the adaptor, as well as nylock nuts and washers.