Custom Light Mount designed by Eerder metaal and made from stainless steel 3mm plate. The mounts are designed to be used with the B+M Toplight S or SON rackmount rear lights.
The Offset version can be bent as needed (Solid Vice and hammer), the light can be mounted slightly offset
The Centered version can be mounted centered of offset, cut the part you do not use. The light is installed centered on the mount.
Paul Components Gino Light MountPaul Components Gino Light Mount
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame.
Paul Components Stem Cap Light MountPaul Components Stem Cap Light Mount
The Stem Cap Light Mount lets you mount a light, computer, or handlebar accessory right above the center of your stem.
An adapter allowing the Sinewave Taillight to be installed on a seatpost.Made by our friends at Yark Components! A bolt (M5 x 35mm) is included. A zip tie (included) or tape must be used to secure the wire to the seatpost.
The Supernova TL3 Multirack Adapter is compatible with TL3 tail lights and is suitable for mounting on standard luggage carriers with a mounting width of 50 mm. There are three ways to route the tail light cable. The adapter is made of anodized, black polished aluminum.
For mounting a front light on GoPro mounts. Stainless steel screws are
included. 40 mm version, for V-AERO-MT and similar mounting positions. Two sizes:Small : 15 mm longLarge: 40 mm long
Supernova Multimount CS: Black
Non-Threaded vork hole versionSupernova Multimount CS
met M6 schroefdraad voor de bevestiging aan draadloze vorkkronen
dubbele scharnierverstelling, versie met korte arm en rvs schroeven
Supernova Multimount HSOP
Stijlvolle montage van je lamp aan de voorvork.Supernova Multimount HSOP
6 mm thick at mounting part
Stainless steel screws
Compatibel met bijna alle SuperNova Lampen
Supernova Multimount SA
Stijlvolle montage van je lamp aan de voorvork.
Versie voor vorken zonder schroefdraadgat. Supernova Multimount SA
met M6 schroefdraad voor de bevestiging aan draadloze vorkkronen
ideaal voor MINI 2, MINI 2 PRO
dubbele scharnierverstelling, versie met korte arm en rvs schroeven
Supernova Multimount TS
Stijlvolle montage van je lamp aan de voorvork.
Versie voor vorken met schroefdraadgat.Supernova Multimount TS
Inclusief M6 roestvrijstalen schroef , 35mm lang
Dubbele scharnierverstelling
Compatibel met de volgende SuperNova Lampen, V521s, E3 PRO 2, E3 PURE 3, V1260
The original Supernova Spacer Mount allows you to mount Supernova front lights on 1 1/8 inch fork stems. The aluminium spacer mount replaces a spacer, making it easy and safe to mount above or below the stem. The headlight remains adjustable at all times, independent of the headset, and is elegantly integrated into your cockpit. Features Supernova original accessory Compatible with 1 1/8 inch (Ø 28.6mm) fork steerer tubes Under or above the stem Aluminium
Anodised black Height approx. 10mm Headlight remains completely adjustable!
Supernova TL3 Seatpost Mount The Supernova TL3 bracket is compatible with the TL3 / M99 TL2 rear lights and allows the vertical mounting of the rear light on the seatpost.
Our universal handlebar holder is available in two sizes (ø 31.8mm and 35mm) and fits all SUPERNOVA front lights (except the AIRSTREAM as there is a separate AIRSTREAM HBM holder). The anodized, matt black holder made of aluminum, can be hinged for mounting and can be mounted on both the left and right side. The stem width should be a maximum of 44mm and the holder requires a free clamping area of 12mm.
With the innovative split clamp with hinge, you can mount the holder on both sides of the handlebars without having to remove a grip, shift or brake lever. All Supernova headlights without an integrated handlebar holder can be optimally positioned at the front of the handlebars with the Universal HBM. The Universal HBM is ideal for mounting the new MINI 2 and M99 MINI headlights.Specs:
For ø 31.8 mm or ø 35 mm handlebars
Hinged for mounting, can be mounted left or right side
Maximum stem width 44 mm, 12 mm free clamping area required
Anodized aluminum, matt black
