The Cogburn Gear Carrier attaches to a rear rack. Included Quick Fist clamps can be configured in mounting points to safely carry a rifle, bow or rod.
Securely and safely holds most Rifles, Bows, and Rods
Gear carried vertically in plane with riders body to avoid snags on narrow trails
Includes three Quick Fist clamps (two 2" and one 1") to easily and securely attach equipment
Attaches to most rear racks but optimized for Salsa Alternator wide and Wanderlust (rack not included)
Gear Carrier NOT compatible with 12mm or larger rack tubing
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that’s loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
Need to carry more gear? Axle mounting increases our Divide rack’s load capacity to 70lbs/33kg.
Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.
Â
A pair of mounting pucks, for bikes without upper eyelets.
Ultra strong and UV stable Panduit Zip Ties
Clear protective tape, for underneath the pucks and Zip Ties
Mounting hardware
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that’s loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
Need to carry more gear? Axle mounting increases our Divide rack’s load capacity to 70lbs/33kg.
Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.Â
This Fit Kit contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your road or gravel bike with a 12 mm thru axle.
This kit includes:
12mm thru axle with 1.0 mm thread pitch
A pair of mounting pucks, for bikes without upper eyelets.
Ultra strong and UV stable Panduit Zip Ties
Clear protective tape, for underneath the pucks and Zip Ties
Mounting hardware
Our thru axles are made in Oregon by The Robert Axle Project.
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that’s loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
Need to carry more gear? Axle mounting increases our Divide rack’s load capacity to 70lbs/33kg.
Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.Â
This Fit Kit contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your road or gravel bike with a 12 mm thru axle.
This kit includes:
12mm thru axle with 1.5 mm thread pitch
A pair of mounting pucks, for bikes without upper eyelets.
Ultra strong and UV stable Panduit Zip Ties
Clear protective tape, for underneath the pucks and Zip Ties
Mounting hardware
Our thru axles are made in Oregon by The Robert Axle Project.
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that’s loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
Need to carry more gear? Axle mounting increases our Divide rack’s load capacity to 70lbs/33kg.
Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.Â
This Fit Kit contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your road or gravel bike with a 12 mm thru axle.
This kit includes:
12mm thru axle with 1.75 mm thread pitch
A pair of mounting pucks, for bikes without upper eyelets.
Ultra strong and UV stable Panduit Zip Ties
Clear protective tape, for underneath the pucks and Zip Ties
Mounting hardware
Our thru axles are made in Oregon by The Robert Axle Project.
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that’s loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
Need to carry more gear? Axle mounting increases our Divide rack’s load capacity to 70lbs/33kg.
Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.
 This Fit Kit contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the front of a bike with a 15 mm thru axle.
This kit includes:
15mm thru axle with 1.5 mm thread pitch
A pair of mounting pucks, for bikes without upper eyelets.
Ultra strong and UV stable Panduit Zip Ties
Clear protective tape, for underneath the pucks and Zip Ties
Mounting hardware
Our thru axles are made in Oregon by The Robert Axle Project.
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that’s loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
Need to carry more gear? Axle mounting increases our Divide rack’s load capacity to 70lbs/33kg.
Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.
 This Fit Kit is for mounting an Old Man Mountain rack to a bike with QR hub skewer. Kit contains:
QR Skewer (Front: 9x100, Rear: 10x135, DIY 239mm length)
Pair of pucks, provide an upper attachment point for mounting the rack.
Clear protective tape, for underneath the pucks and Zip Ties.
All Mounting hardware
Old Man Mountain Axle Pack is unlike any fork mount adapter you’ve seen.
Axle Pack is thru-axle mounted, making it impossible to slip or spin.
With 3-pack mounts on the uprights you can carry bottles, fuel, stuff
sacks, dry bags, bolt-on bags, and more
Provides 3-pack mounts on any thru-axle fork
Thru-Axle mounted rather than trying to clamp to round or tapered surfaces and just hope it doesn’t slip or spin
Axle Pack is rated to 10kg per pair
Four mounting points to run your gear higher or lower depending on your needs
Designed to be mounted to Old Man Mountain Thru Axle Fit Kits
Weight Limit: 11 lbs
Rack Mount Position: Front
Material: Aluminum
Weight: 146g.
Color: Black
Surly TV Tray Rack Platform Black.
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups.Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black.
Load weight limit 13,5 kg
Maten: 39 cm x 25.4 cm
Rack weight 650g
6061-TB Aluminum
Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack
Mounting Hardware Included
Verbindt uw Tubus achterdrager met het fietsframe. Kenmerken Wordt per stuk verkocht. Materiaal: AluminiumLengte: 350 mm. Zonder offset. Gewicht: 45 g Kleur: Zwart
€ 6,95*
Deze website maakt gebruik van cookies om de best mogelijke ervaring te waarborgen. Meer informatie...