Why Just Pedal?

For every frame we ship out here at Just Pedal we can, when requested :

ream and face head tube and bottom bracket tube
face the crown race of the fork
Install headset and/or bottom bracket

Select Frame Preparation as additional option with the purchase of your frame.

Why prep your frame?

When using 2 seperate cups for headset (always) or bottom bracket (for all non-square taper bottom brackets) it is important these 2 cups are as parallel and in line as possible. Most tubes are straight (and if not, there is nothing a normal mechanic can do about it), so the cups will be in line, but not all tubes are cut straight, and also paint may cause this non-parallelism. By facing both ends of the tube you can ensure the cups are seated in the frame as parallel as possible. This will cause less wear of and play in the bearings.

Soma Wolverine Frame V4.1 - Type A - Orange

€1,179.00*

Prices incl. VAT plus shipping costs

Available in 21 days, delivery time 2-5 days

Frame Size

Product number: Wolv-41A-66

Manufacturer: Soma Fabrications

Directly available: 0

Product information "Soma Wolverine Frame V4.1 - Type A - Orange"

The original inspiration for the Wolverine was “monster cross”, but it is seriously so much more. Its geometry is stable enough for off road touring, but sporty enough for all-around adventure.

2023 brings us the 4.1 A-Type update which adopts the flat mount disc standard on the frame and optional CrMo fork.

The A-Type has more modern standards than the B-Type, such as 142mm rear thru-axle and a 44mm headtube that will fit 1-1/8 straight steerer or tapered steerer forks with the proper headset type. There is NO frame break for Belt-Drive on the A-Type Wolverine. (See chart in photo gallery for other differences between A and B)

Specs A-Type:

Tange Prestige heat-treated CrMo tube set
Clearance for 700x45c tires w/ fenders
Rear hub spacing/type: 142 x12mm Thru-Axle
IRD Broski sliding dropouts allow for geared or single-speed builds
Optional Matching Fork: Unicrown straight blade 15mm thru-axle fork with cage bosses (1-1/8”)
(No lugged crown fork offered for the Type-A)
Braze-ons for rear rack and fenders (disc brake-compatible racks only)
Three sets of water bottle bosses
44mm headtube (Use ZS44/28.6-ZS44/30 headset for 1-1/8” steerers) (Use ZS44/28.6 -EC44/40 headsets for 1-1/8”-1-1/2” steerers)
Sizes: 46, 50, 52, 54, 56, 58. 60, 62 and 66cm (We recommend 650b tires on the 46cm)
2.2 Kg (frame)
Paint: Orange

Headset

Cane Creek 40 Headset ZS44/28.6 - EC44/40

Cane Creek Balhoofd 40 ZS44/28.6 | EC44/40

€99.99*

Cane Creek 40 Headset ZS44/28.6 EC44/30

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. Sealed black oxide bearings Carbon-friendy compression ring captured in top cover, keeping shims in place Steel crown race with integrated seals Interlok spacer compatible Compatible with straight steerer 1-1/8" forks Weight: 171 g Upper Stack Height: 8 mm Lower Stack Height: 12 mm Crown Race: 30 S.H.I.S Lower: EC44 S.H.I.S Upper: ZS44 S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

€99.99*

Cane Creek 50 Headset - ZS44 | EC44/30

Slotting immediately in between the Forty series and Hellbender 70 headsets, Fifty series brings a new, modern aesthetic while maintaining a relatively affordable price. Additional machining on the top cover and cups along with refined, laser-etched graphics give the headset a sharper, more angular appearance that feels more appropriate for today’s bike.Specs: Cups & Covers: 6061 T-6 Aluminum, Internally relieved to reduce weight Bearings: ZN40 sealed cartridge bearings, zinc-coated for corrosion resistance Sealing: Steerer tube o-ring seal, low friction top cover lip seal, co-molded crown race lip seal Compression Ring: Carbon-friendly compression ring retained in top cover Crown Race: Steel forged, then machined for increased hardness & durability Spacers: Compatible with Cane Creek Interlok spacers + traditional spacers Stack Heights: External Cup (EC) — 15mm top, 11mm bottom ZeroStack (ZS) — 8mm top, 4mm bottom Integrated (IS) — 9mm top, 1mm bottom

€114.95*

Details

Cane Creek 50 Headset - ZS44 | ZS44/30

Slotting immediately in between the Forty series and Hellbender 70 headsets, Fifty series brings a new, modern aesthetic while maintaining a relatively affordable price. Additional machining on the top cover and cups along with refined, laser-etched graphics give the headset a sharper, more angular appearance that feels more appropriate for today’s bike. Specs: Cups & Covers: 6061 T-6 Aluminum, Internally relieved to reduce weight Bearings: ZN40 sealed cartridge bearings, zinc-coated for corrosion resistance Sealing: Steerer tube o-ring seal, low friction top cover lip seal, co-molded crown race lip seal Compression Ring: Carbon-friendly compression ring retained in top cover Crown Race: Steel forged, then machined for increased hardness & durability Spacers: Compatible with Cane Creek Interlok spacers + traditional spacers Stack Heights: External Cup (EC) — 15mm top, 11mm bottom ZeroStack (ZS) — 8mm top, 4mm bottom Integrated (IS) — 9mm top, 1mm bottom

€89.95*

Details

Cane Creek 50 Tapered Headset - ZS44 | EC44/40

€114.95*

Details

Surly Midnight Special Frame - 650c/700c - Fool's Gold

The Midnight Special is an endurance road bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. It excels on pot-holed, deteriorating pavement and the occasional long stretch of gravel. The Midnight Special’s 700c tires eat up road chatter and absorb all the bumps in the road for a much more comfortable ride. 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork Rack, fender, and three sets of water bottle mounts Flat-Mount disc brakes 44mm head tube Tire Clearance: 27.5 x 2.35" (w/o fenders), 700c x 42mm (w/o fenders), 650b x 50 (w/ fenders), 700c x 38mm (w/ fenders

€799.00*

Details

White Industries Headset ZS44/28.6 | EC44/40

Color: Purple

At White Industries, they always strive to make the highest quality products and our Headsets are no exception. This product has been designed with the user in mind in a few ways. Easy to service, clean, and adjust your headset. For durability, the headsets are made with stainless steel bearings and aluminium cups to give you corrosion resistance and strength. All this has been done to create a headset you can rely on wherever your bike takes you.

Variants from €179.99*

€194.95*

Frame Prep

Just Pedal Frame Preparation

For every frame we ship out here at Just Pedal we can (when necessary): ream and face head tube and bottom bracket tube face the crown race of the fork Install headset and/or bottom bracket Why would you Ream or face your frame and fork? When using 2 seperate cups for headset (always) or bottom bracket (for all non-square taper bottom brackets) it is important these 2 cups are as parallel and in line as possible. Most tubes are straight (and if not, there is nothing a normal mechanic can do about it), so the cups will be in line, but not all tubes are cut straight, and also paint may cause this non-parallelism. By facing both ends of the tube you can ensure the cups are seated in the frame as parallel as possible. This will cause less wear of and play in the bearings.

€39.00*