The Jones Truss Fork Packs, made by Revelate Designs, are low-profile, secure packs that make use of the rack-like structure of the Jones Truss Fork to provide a very stable and lightweight storage option. The weight is kept low and close to the axles, which allows you to carry heavy loads without disrupting the handling of the bike. These packs are the the closest thing to a traditional low-rider pannier setup that can withstand the jarring that a bike goes through when you're off riding over rumbly-hill and bumpy-dale, and have a surprisingly large carrying-capacity. After literally years of design work, the Truss fork finally has a pack that makes use of its great, rack-like structure! There have been many iterations of Truss Fork packs over the years, but this is the largest, most full-featured design to date. The mounting system is simple, but extremely secure to keep the packs from moving even when heavily-loaded and used in the bumpiest of conditions. Made of VX-21 polyurethane-coated X-pac with a bright orange liner so you can see what's inside easily. Huge #10 zippers with with two pulls and rubberized rain cover are durable and easy to close. Compression straps allow you to cinch-down your load. Small mesh pockets on the outside rear of the packs for small items you don't want to keep inside the pack. Elasticized accessory pocket inside the pack will fit a water bottle. 17.5" tall x 4-6.5 wide x 4-5.5" deep (tapered design, hence the ranges) 765g/1 lb 10oz per pair.

The Jones H-Bar Pack is designed specifically for the Jones Loop H-Bars, and it's a great little pack!  The low profile of the pack keeps it from interfering with the wide range of hand positions available on the H-Bars, and it even has a small cutout at each end to allow room for your thumbs next to the pack!  Of the pack's effect on hand positions, Jeff says "With the new pack I still have all the hand positions I normally use if it is not fully stuffed and if I just use the four main straps. If it is stuffed full or if I use the extra straps, then I can't grip around bar next to the stem but I don't do that much anyway. The pack itself is nice to rest on with open hands and it supports my forearms when in the aero position like a little padded hammock."  Works both with both the standard .5" and 2.5" H-Bars.  With the SG 2.5 Aluminum Loop H-Bar, the H-Bar Pack will have a gap around the pack and will tilt back toward the rider slightly, but works very well.Features of the H-Bar PackTPU coated nylon fabricWaterproof, welded construction with a water-resistant zipper for great water resistance.Long daisy chain sections along front and back of pack for very secure attachment.Single, straight-line zipper is easy to open with one hand.Single layer construction is very light weight at 95 grams.11" wide X 3.5" front to rear X 3.25" height/depthFits all Jones Loop and Cut H-Bars. Blog post about this bag.Refer to the H-Bar Pack Manual for set-up tips!

A new fastening system, the Bar-Lock, enables the waterproof Handlebar-Pack QR (Quick Release) to be attachedand removed in no time at all. This means that you can quickly and easily take off the bag and carry it with you whenyou reach your destination. Thanks to the bar-lock cord attachment, this bikepacking bag remains stable and secureon the handlebars, even on rougher terrain. Internal compressions and the roll closure adjustable height ensuresthe safe storing of gear or equipment. Two further hooks with CamLock fasteners on the front create further compressionoptions.The handlebar pack QR has an 11-liter volume, weighs only 530 grams and is loaded from above. In addition to bikepacking,this pack would be a great asset for long gravel rides or races thanks to its narrow 32 centimeter design.Lateral outer pockets allow small accessories or snacks to be stowed away yet accessible while riding. The PVC-freebag is made of abrasion-resistant nylon fabric. The maximumload is five kilograms. Pair the bag with the extra Handlebar-Pack QR Inner Pocket to keep things tidy, and conveniently store and accessyour cash, cards or a mobile phone. Specs: Volume: 11 L. Weight: 500 gr Max Load: 5kg

To address the needs of long-distance ultra racing, the Pitchfork Aerobar System provides load carrying and storage for essentials that you want quickly at hand. The Pitchfork is a 2-part holster system featuring gigantic stretch woven side pockets with a removable 6 Ultra 200 denier drybag. The pockets easily swallow light clothing layers and can securely stow calories from a gas station resupply. To optimize the size of the pockets the holster wraps over the bars rather than strapping underneath. This allows for both bigger pockets and provides fast access to a flat platform top mounted bungee system. Everything is designed for quick access and all cords are field replaceable for the long haul.  To accommodate different bar spacing, pairs of laser cut hypalon slots are built into the holster to change the strap mounting width.  The seam taped Ultra 200 UHMWPE drybag has an asymmetrical tapered bottom for stem clearance and is sized to fit a light sleeping/shelter system or warm clothing and rain gear. A removable front strap can be used to tension the front of the drybag if using it fully packed on rough terrain. The drybag is secured to the holster with spring loaded, non-dangling auto cam buckles. Check out Bikepacking.com's review of the Pitchfork here.Specs:Weight: 170 grVolume of Dry Bag: 6L with closure rolled 3 times Volume of Pockets: ~ 1L each side Holster: Challenge EPX 200 laminate Ultra Stretch - UHMWPE reinforced stretch woven pocket fabric 1.0mm TPU - HypalonDrybag: Challenge Ultra 200 UHMWPE woven

The Saltyroll is a simple waterproof drybag with roll down closures on both sides. Use it with the Harness or some other carrying system.Features: Webbing daisy chain allows for a multitude of strap placements. Slot the straps on the Harness through the loops to keep the bag centered. RF Welded waterproof seam construction Dual roll down closures Sizing: 7" / 18 cm diameter, 24"/ 60 cm maximum length (3 rolls of closure each end) Weight: 6.2 oz / 175 gram Volume: 925 cu / 15 liter in @ max width Materials: 210 denier nylon. Dual coat TPU.

The Sweetroll® is our standalone, 100% waterproof, bikepacking handlebar bag. It’s highly versatile with dual side roll down closures  that allow for a wide range of load carrying options. The modular front system integrates with our front pockets for additional storage. Sweetrolls are built with radio frequency welded seams.Specs: Waterproof RF welded construction. Adjustable stacking spacers offset the Sweetroll from the handlebar and prevents cable and lever interference and bag abrasion - An original Revelate Designs innovation. Manta Flap - Shove stuff between the flap and the main bag. Features two rows of daisy chain webbing for custom configurations. Swap it out for a pocket for added capacity. Fiberglass cross stiffener adds rigidity to the mounting area and provides structure when packing and unpacking. Thick EVA foam spacer block at the head tube prevents abrasion and bag wear against bike frame. Two sizes: Medium (11L)  & Large (15L) Medium: 11L, 16cm diameter, 56cm max. breedte, 440 gr Large: 15L, 18cm diameter, 56cm max. breedte, 460 gr.

The Egress™ Pocket is a waterproof, seam-welded roll top handlebar bag. It integrates with the Sweetroll and Harness, or can be used standalone on the handlebars with the included strap kit. The side profile of the Egress™ is curved slightly to contour around the main drybag so the bags nest well when the straps are tightened. This bag was built with the distance traveler in mind. It features a removable padded liner, giving you the option to protect electronics when the bag is removed and dropped at camp. The liner also features a small zippered pocket. On the outside, the Egress™ has a small carry handle and D-rings to attach a minimalist shoulder strap (included), making it a versatile travel companion. A jacket or extra layer can then be stored in the straps that typically attach it to the Sweetroll & Harness. Lastly, you can even run your belt through a series of webbing slots turning it into a hip pack. The webbing and hook closure with high cycle life velcro make for a secure and durable closure. Specs: Waterproof Contoured sides Roll top closure with hook strap Removable padded liner Small zippered pocket in removable liner Stand alone mounting and off bike versatility SIZING: 3" depth 9.5" width 7-8" height Weight: 10.0 oz complete, 7.5 oz without extra straps and liner removed. Volume: 175 cu in approx. Materials: 210 Denier Ripstop Nylon double side laminated with TPU Hypalon reinforcements

The Harness is a semi-rigid mount designed to carry drybags, packrafts, stuff sacks and other cylindrical shaped objects. Think of it as a “soft rack” for your handlebar, the harness has built in straps that excel at carrying light, bulky loads. Integrate it with any of our front pockets for a highly versatile carrying system.When you need quick access to your stuff sack or dry bag, the Harness is ideal. Best used for widely varying loads, load it up with your tent, minus 40 degree sleeping system, packraft, ultralight drybags, fishing gear or a mini keg. Use your imagination. Relying on a flexible connection, the Harness is crash-proof as there are no rigid connections to fail if you wreck in the middle of nowhere. Our 3 strap design allows for balanced and easy bag mounting - center the load and fasten the middle strap first, then the outer 2. Specs: Molded rubber spacer blocks provide offset from handlebars reducing lever & cable interference. Fiberglass cross-bar provides lateral stiffness across the 3 straps. 3 layer, compression molded EVA composite material. Grippy inner surface keeps your load in place. Glove friendly, easy access buckles with locking cam straps. Optional attachment straps for front pocket attachment. Cam locking crown / head tube center strap with EVA spacer block Drop bar users - The Harness works fine with drop bars; you are limited in the width of the main bag you mount in it, but can opt for a larger diameter drybag. The Harness is ideal for widely varying loads and when you need quick access to your stuff sack or drybag. They can carry tents, minus 40 sleeping systems, packrafts, ultralight cuben drybags and mini kegs. Use your imagination. Disk or V Brake only - The Harness is NOT compatible with cantilever or road style front brakes with a vertical exposed cable. 15 lb / 6,8 kg weight limit.

Molded rubber spacer blocks to provide offset from handlebars and reduce lever and cable interference for the handlebar Harness. These are sold as a replacement piece in case you lost or damaged yours. Sold as a pair.

Revelate Designs Jones H-Bar Kit

Jones Loop bars are awesome bikepacking handle bars. To play nice with the Loop bars, we tweaked the design of the Sweetroll for this spring, adding attachment points to mount the bag to 4 points on the bars. This gives bomber stability seperates the bag entirely from the frame / fork area. Kit contains straps & foam spacers, no bagIf you are using the size large Sweetroll, or have a lot of weight, it’s probably best to use the standard mounting since the load is more centered and handling will be less effected. However for most bikepacking loads & riding technical trails – going with the the 4 point mount is recommended.

The newly redesigned Mountain Feedbag you love now features the single handed access you need.Ten years ago Mountain Feedbags started the entire category of stem bags. They've proven their worth on just about every major backcountry race and route that exists. As the name suggests, the Mountain Feedbag is an on-the go aid station for endurance riding. It offers ample food storage with fumble free one handed access via an innovative drawcord system. Slightly larger than the previous version, you can now easily fit your beloved 1L Nalgene bottle, camera lenses, and more. We've also added an additional outside pocket, leaving you with more space for wrappers, sunscreen, granola bars and other small items. Mountain Feedbags also work well as bike mounted lens cases for mirrorless camera systems. Features: Super fast, one handed (really!) opening and closure with no fumbling to grab cord locks. Three external pockets for gels and trash. Three layer construction: outer fabric, foam and liner. Foam adds stiffness and insulates. Bright yellow interior liner snaps in place and is easily flipped for cleaning Mounts to either side of stem with adjustable attachment points - run two for tons of storage Easily used in combination with a Sweetroll or Harness handlebar system Fits bike water bottles, Nalgene bottles, and bear spray cans Weight: 3.7 oz / 100 gram Materials: Revelate exclusive VX 21 polyurethane coated X-pac; 420 denier yellow lining

The Pronghorn is a race focused, lightweight handlebar system for the minimalist bikepacker. Without sacrificing functionality, the Pronghorn is a stripped-down bar mounted carrying system. Personally tested and refined by Revelate designer Dustin Eroh on the Arizona Trail Race 750 and a time trial of the Oregon Timber Trail, the Pronghorn has garnered distinction from the racing community for its stable and simple functionality since its release in 2018. A key to the system's performance is a strategically placed internal fiberglass stay that is integrated into both the mounting points and front drybag attachment straps. This keeps your load from shifting while navigating techincal singletrack. Read the Bikepacking.com review here!Choose from three sizes of waterproof drybags made from Stratex 400, Revelate's exclusive woven UHMWPE fabric. Stratex 400 is a woven blend of polyester with over 60% UHMWPE fibers by weight, laminated to a waterproof film. The resulting fabric is insanely durable and abrasion resistant without much sacrifice in weight. Keeping true to its intended purpose, the updated Pronghorn is dialed in to fit your kit perfectly with appropriate bag sizing for various types of trips. Once the holster is mounted and the drybag is secured, you can rest assured that your gear is not going anywhere. When standing at the starting line of your next race, or sprinting to the hills on a fast and light bender, the Pronghorn is the most efficient solution for your gear carrying needs. Internal fiberglass stay provides a stable, lightweight mounting platform Dual cam locking straps integrated into handlebar mount secure your load Cam locking head tube strap with EVA foam spacer Removable spacer blocks to allow you to adjust for brake lever clearance Includes pocket clips to allow the addition of a front pocket Waterproof drybag built from Revelate's new UHMWPE based fabric, Stratex 400 Stratex 400 fabric is 60% UHMWPE woven fibers by weight Waterproof drybag constructed from Stratex 400 is more abraision resistant than other leading lightweight fabrics Sizes: Small - 42 x 11,5 x 16,5 cm (LWH), 213g, 7,5 L Medium - 48,5 x 18 x 14 cm (LWH), 232g, 11 L Large - 61 x 14 x 19 cm (LWH), 252 g, 23 L

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0 mm or 31.8 mm clamp diameter. Compatible with 35.0 mm bars or 31.8 mm bars (with included shims) Compatible with all Salsa EXP Series Anything Cradles Hinged clamps allow for easy installation and removal from handlebars Made of 6061 forged aluminum

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely Works with or without EXP Series Anything Cradle Front Pouch Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely Works with or without EXP Series Anything Cradle Front Pouch Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection

Salsa's EXP Series Anything Cradle system is designed to create carrying capacity in front of your handlebars, while providing ample room for cables without fear of kinking them. This system is available as a complete "kit", or sold individually for custom set-ups.Specs: Mounts directly to handlebars with super tough 6066 Aluminum mounting hardware, and hinges for supremely easy installation and removal Thoughtful design accommodates multiple loop options for the Anything Straps Placement of the Anything Cradle holds gear about two inches away from handlebars Loaded up, everything feels well distributed and cockpit components can still be easily adjusted Weight: 420g with hardware, Max. Load Weight: 3.7kg

The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag.Specs: Keeps your ride essentials in easy reach Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system Extremely weather-resistant welded design Volume: 2.42L

The Salsa EXP Series Side-Load Dry Bag is tailored to fit the Anything Cradle, attached via a pair of our EXP Series Rubber Straps. The bag holds all of your bikepacking essentials and opens at both ends for a fixed height that makes on-the-bike loading easy. Fully welded construction, maximum versatility, and hook-and-loop points for ease of attachment make this supremely useful dry bag a key part of any bikepacking set up.Salsa EXP Dry Bag Features Slots and hook-and -loop for easy installation Slots for straps to keep bag from moving side to side when installed Waterproof welded-in design Materials: 420D nylon with TPU lamination and PU coating Construction Methods: Fully welded-in construction Dimensions: Length - 850mm, diameter - 200mm Weight: 220g, Volume: 15L

The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. Constructed from urethane-coated nylon canvas to provide water-resistant protection Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves Integrated light port allows a battery cord to pass through Dimensions: 254 x 90 x 90mm

Designed to pair with the Surly 8-Pack Rack and similar porteur-style front racks, the Petite Porteur House Bag attaches easily via three adjustable straps. Featuring a refined pocket strategy, a classic roll top and structured body for added stability, and a bunch of webbing loops for attaching lights and lashing straps, there’s nothing petite about the possibilities here.Specs: Includes two One-Wrap straps and one accessory bungee for securing loads of different shapes and sizes Large main compartment, one large front pocket, and two smaller pockets in back25-lb. bag capacity. Consult your rack’s weight limitations Dimensions when Rolled: 275 x 190 x 240mm Dimensions when Unrolled: 275 x 190 x 400mm Main body 1680D nylon, Liner 400D nylon. Bag fabric and hardware are bluesign Approved, which means the materials are sustainably produced to have the lowest possible impact on people and the environment 11L volume

Surly Porteur HouseThe Porteur House is made to fit Surly's 24 Pack Rack. It uses a system of eight Velcro straps to secure itself to the rack. The strap system is designed such that it will interface with many porteur-style racks with similar platform dimensions. The Porteur House bag is made from durable 1050 Nylon Canvas with polyurethane coating for protection from the elements. It uses a stiff insert in the bottom of the bag to give it shape and keep your stuff protected from wheel-spray. They also include three urethane coated, water-resistant nylon stuff sacks for an added layer of protection in each compartment; 2 front pockets and the large main compartment. The Porteur House bag has two accessory pockets on the front of the bag, each with a light loop to keep you visible and safe. Its main compartment is difficult to describe without using the word huge, and the roll-top closure keeps the rain out and your stuff in. The Porteur House also comes with a shoulder strap so you can take the bag off the bike and use it when you’re at the Hallmark store shopping for your little figurines and keepsakes. If you’re the kind of person who likes accessories that make your bike infinitely more useful, the Porteur House is for you. With dimensions sitting at 400x270x450mm, fully extended, this bag will be a monolithic figurehead of two-wheeled practicality perched on the front of your bike. The strap system keeps it planted to your rack, and it's more than large enough to bring home the bacon – literally – go to the store and get some bacon.

Surly Porteur House Designed to fit the Surly 24-Pack Rack, Surly’s updated Porteur House Bag features a versatile strap system that gets along with a variety of Porteur-style racks. Simple to install and remove, it’s been tweaked to be even better for commuting and light weekend camping. With a structured body to stabilize your cargo, an integrated nylon liner, a handy roll top for accommodating bulky items, and more pockets than your old cargo pants, the Porteur House Bag makes unwieldy loads decidedly wieldier.Specs: Includes two One-Wrap straps and one accessory bungee for securing loads of different shapes and sizes One large main compartment, two front pockets, and two additional pockets on both sides of bag 30-lb. bag capacity. Consult your rack’s weight limitations Dimensions when Rolled: 370 x 280 x 240mm Dimensions when Unrolled: 370 x 280 x 440mm Main body 1680D nylon, Liner 400D nylon. Bag fabric and hardware are bluesign Approved, which means the materials are sustainably produced to have the lowest possible impact on people and the environment 18L volume