Phil Wood Track Cog 1/8"

Phil Woods stainless steel track cogs are available in 1/8″ and 3/32″ widths, from 20 to 22 teeth. The cog threading is 1.370″ x 24 tpi. Our track cogs are manufactured from solid stainless steel bars and are heat-treated three separate times. In order to show that our cog is not plated, we polish and laser etch the outer face of each cog while leaving the inside face in its natural state.

We recommend our track cogs for use with our track hubs, as they are machined to work together seamlessly. Other track cogs on the market often have varied widths, sometimes resulting in a cog that is too wide for the threads on our track hubs which can lead to less than complete engagement of the lock ring and thread stripping from the hub.

Meer details

Verstuurd binnen 2-8 werkdagen

€ 45,00 incl. BTW

-40%

€ 75,00 incl. BTW

Meer informatie

Chain Compatibility: 1/2" x 1/8"

Recensies

Geen klantenbeoordelingen op het moment.

Schrijf uw recensie

Phil Wood Track Cog 1/8"

Phil Wood Track Cog 1/8"

Phil Woods stainless steel track cogs are available in 1/8″ and 3/32″ widths, from 20 to 22 teeth. The cog threading is 1.370″ x 24 tpi. Our track cogs are manufactured from solid stainless steel bars and are heat-treated three separate times. In order to show that our cog is not plated, we polish and laser etch the outer face of each cog while leaving the inside face in its natural state.

We recommend our track cogs for use with our track hubs, as they are machined to work together seamlessly. Other track cogs on the market often have varied widths, sometimes resulting in a cog that is too wide for the threads on our track hubs which can lead to less than complete engagement of the lock ring and thread stripping from the hub.