Surly Disc Trucker Frameset 26" Black
The Disc Trucker shares the same great features as the standard Long Haul Trucker with the addition of disc brakes, to provide dependability on the daily commute or trans-continental excursion. It’s designed to go the distance, and the rack mounts enable it to haul a bunch of stuff. The frame features a low bottom bracket and long chainstays for comfort and stability.
For 2020 the Disc Trucker has a revised & updated geometry. The new Disc Trucker has slightly shorter chainstays that add more agility when riding unloaded or with only a few things. We increased the stack and the headtube height. With a larger stack comes reduced standover clearance. So, we massaged the numbers to net just as much (if not more) standover than the legacy model, but you may notice that not all sizes have a truly horizontal top tube.
The new dropouts are built around a 12mm thru-axle front and rear, and the bike is spaced at 100mm front and 142mm rear, with threaded axles.
Specs:
- 100% 4130 chromoly steel frame and fork; main triangle double-butted, ED coated for increased life expectancy
- Upper bosses and dropout eyelets for racks front and rear, fender eyelets, pump peg, spare spoke carrier, and three sets of water bottle cage mounts
- The fork includes a routing hole for your dynamo hub. This isn’t earth-shattering, but proper placement cleans up the front end quite a bit.
- Chainring clearance max: 42/53t double, 38/52/56t triple
- 51mm IS disc mounts, designed to be used with 160mm rotors only
- Clears a 26 x 2.1" tire with or without fenders
- Rear brake mounting between seat stay and chain stay for zero interference with fenders or racks
- The new dropouts are built around a 12mm thru-axle front and rear
- The bike is spaced at 100mm front and 142mm rear, with threaded axles.
- Still compatible with triple cranks for when you need all the gear range you can get!
- Rohloff internally geared hub compatible using the upper rack mount on the NDS dropout. The boss is sized to mimic an M6 bolt head and index perfectly with an OEM2 axle plate. A chain tensioner will be necessary.
More info can be found at Surly Bikes